Paints & Coatings

High-performance binders and additives for architectural, decorative, and industrial coatings — from interior emulsion paints to heavy-duty protective topcoats.

Architectural Coatings Industrial Coatings Wood Finishes Elastomeric Coatings

Market Overview

The paints and coatings industry demands binders that deliver consistent film formation, excellent adhesion, durability under UV and weather exposure, and compliance with increasingly strict VOC regulations. Whether you’re formulating interior wall paint for residential use or a high-build industrial protective coating, the choice of emulsion resin is the single most important formulation decision.

JCT Chemical offers a comprehensive range of acrylic, styrene-acrylic, and specialty emulsions specifically optimised for coating applications — supported by a full suite of compatible additives including rheology modifiers, wetting agents, and defoamers.

Application Areas

Architectural & Decorative

Interior and exterior wall paints, ceiling coatings, textured finishes. Requires balance of open time, scrub resistance, and whiteness retention.

Recommended: JCT-A100, JCT-SA310, JCT-VA500

Industrial Protective

Metal primers, anti-corrosion coatings, floor coatings. Requires high crosslink density, chemical resistance, and adhesion to challenging substrates.

Recommended: JCT-XL400, JCT-A200

Elastomeric & Roof

Crack-bridging exterior coatings, waterproof roof membranes. Requires low Tg for cold flexibility and elongation at break >150%.

Recommended: JCT-A100 (Tg +15), custom low-Tg grades

Recommended Products

Acrylic Emulsion Resins

Pure acrylic and styrene-acrylic binders from Tg −10°C to +45°C. Multiple grades for interior paint, exterior topcoats, and industrial finishes. APEO-free options available.

View grades & specs

Rheology Modifiers

HASE and HEUR associative thickeners for precise viscosity control, anti-sag performance, and levelling in architectural and industrial paints.

View grades & specs

Wetting & Dispersing Agents

Pigment dispersants and substrate wetting agents that improve gloss, reduce grind time, and enhance colour development in coloured coatings.

View grades & specs

Defoamers & Antifoams

Mineral oil and silicone-free defoamers compatible with acrylic and styrene-acrylic emulsion systems. Effective at low addition rates.

View grades & specs

Technical Resources

Application Guide: Exterior Wall Paint

Selecting the right acrylic emulsion for exterior durability — Tg, MFT, particle size, and weathering performance explained.

Read guide

Formulation Note: Industrial Floor Coatings

How to use JCT-XL400 self-crosslinking resin to achieve 500+ hour chemical resistance in water-based floor coating systems.

Read guide

Find Your Coatings Solution

Our application chemists can recommend the right resin grade and additive package for your specific formulation challenge.

Speak to an Expert Browse All Products